Panasonic TH-42PH30U Operating Instructions Manual

Also see for TH-42PH30U: Specifications Operating instructions

Contents

Panasonic TH-42PH30U Operating Instructions Manual Manual pdf 44 page image

44Item AdjustmentsStudio W/BOff: Nullify all the settings adjusted.On: Sets the color temperature for TV studio.Note: Valid only when the “WARM” is set as “COLOR TEMP” in PICTURE menu.Studio GainSharpens the contrast for a better view when a part of the image is too light to see.Off: Disables “Studio Gain”.On: Enables “Studio Gain”.Note: This setting is valid only when the input signals are as follows:Component Video, RGB (analog), HDMIPower On ScreenDelayOff 1 2 3.... 30You can set the power-on delay time of the displays to reduce the power load, when you press to turnon the multiple displays that are set together, for example, on MULTI DISPLAY system.Set each display’s setting individually.Off: The display will be turned on at the same time as is pressed.1 to 30 (sec.) : Set the power-on delay time (second).After pressing , the display will be powered on with time delay depending on this setting.Notes:• During this function is working, the power indicator is blinking green.• This function also works when the power recovers from failure or after plugging off and in again the power cord.All AspectSets All Aspect mode (advanced aspect setting) or default aspect mode.With each press of button, the aspect changes in the selected mode.Off: Default aspect modeOn: All Aspect modeAspect mode of each setting is as follows:(Example: HD signal)Off 4:3→H-FILL→ZOOM→FULL→JUSTOn 4:3 (1)→4:3 (2)→4:3 Full→Zoom1→Zoom2→Zoom3→16:9→14:9→Just1→Just2Auto SetupSets the operational mode of the automatic position adjustment in the POS./SIZE menu.Manual: Automatic position adjustment starts when is pressed on the remote control or automatic positionadjustment is executed from the POS./SIZE menu.Auto: Other than remote control or menu operation, automatic position adjustment starts:When the display power is turned ON.When the input signal is switched.Rotate Off: Does not rotate the image.On: Rotates the image 180 degrees.Power On Message(No activity poweroff)Whether to show/hide No activity power off Precautions at the time of power ON is set.On: The warning precautions are shown at the time of power ON.Off: The warning precautions are not shown at the time of power ON.Notes:This setting is enabled only if “NO ACTIVITY POWER OFF” is “ENABLE”.NormalizationWhen both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “RemoteID” adjustments, set all the values “Off” so that all the buttons are enabled again.Press the button on main unit together with button on the remote control and hold for more than 5 seconds. The“Shipping” menu is displayed and the lock is released when it disappears.Options Adjustments