Panasonic TH-42PH20E Operating Instructions Manual

Also see for TH42PH20E: Service manual Operating instructions Service manual

Contents

Panasonic TH-42PH20E Operating Instructions Manual Manual pdf 42 page image

H-Freq.V-Freq.kHzHz63.9860.02Signal Format 1280×1024/60SyncSignal [ RGB ]Cinema realityXGA ModeAutoOffAutoH-Freq.Dot Clock Freq.kHzMHz63.98108.0V-Freq. Hz60.02Signal Format 1280×1024/6042This function operates only during input from PC IN terminal.Select Signal from the “Setup” menu during RGB or Component input signal.Setting RGB sync signalConfi rm that the input is set to RGB input (this setting is valid only for RGB input signal).Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.Setting Component sync signalConfi rm that the input is set to Component input (this setting is valid only for Component input signal).Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.on Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.Note:Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”SyncSetup for Input SignalsPress to select the “Sync”.Press to adjust.Displays the frequency and the type of the current input signal.This display is valid only for Component / RGB / PC and Digital input signal.Display range:Horizontal 15 - 110 kHzVertical 48 - 120 HzThe dot clock frequency is displayed during digital signal input.Input signal display