Panasonic TH-42PH20E Operating Instructions Manual

Also see for TH42PH20E: Service manual Operating instructions Service manual

Contents

Panasonic TH-42PH20E Operating Instructions Manual Manual pdf 33 page image

1/2SignalScreensaverExtended life settingsInput labelOffStandby save OffPC Power management OffAuto power off OffOSD Language English (UK)Component/RGB-in selectRGBPower saveSetupDVI-D Power management Off33Reduces power consumptionPress to select“Power save”“Standby save”“PC Power management”“DVI-D Power management”“Auto power off”.Press to select “On” or “Off”.On OffPress to exit from Setup.123• Power save: When this function is turned On, luminous level of the Plasma Display issuppressed, so power consumption is reduced.• Standby save: When this function is turned On, power consumption of the microcomputer isreduced during power supply standby (see page 13, 16, 17), so standby power ofthe set is reduced.• PC Power management: When this function is set to On, it operates under the following conditions to turn thepower on or off automatically.When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PCsignal input:→ Power is turned off (standby); the power indicator lights up orange.When pictures (HD/VD sync signals) are subsequently detected:→ Power is turned on; the power indicator lights up green.Notes:• This function operates only during PC signal input.•This function is effective when “Sync” is set to “Auto”, “Component / RGB-in select”is set to “RGB” and during normal viewing (one picture screen).• DVI-D Power management: When this function is set to On, it operates under the following conditions to turn thepower on or off automatically.When no pictures (sync signal) are detected for 30 or so seconds during DVI signalinput:→ Power is turned off (standby); the power indicator lights up orange.When pictures (sync signal) are subsequently detected:→ Power is turned on; the power indicator lights up green.Notes:• This function operates only during DVI signal input.• This function is invalid during input from DVI-D Terminal Board (TY-FB11DD).•Depending on the type of terminal board equipped, this function may be invalid.• Auto power off: Equipment power supply is turned Off when there is no signal.When this is set to On, the power supply of the unit goes Off 10 minutes after theinput signals stop.Note:This function is effective during normal viewing (one picture screen).