7Check your computerNecessary environment for computers to be connectedFirst, check your computer to see whether or not it has a wired LAN• or a built-in wireless LAN function.Before connecting the Display to the computer, be sure to check the following settings.•Operation is not guaranteed for all wireless LAN adapters and built-in wireless LAN adapters.•Wired LAN Check 1 For LAN cableIs the cable properly connected?•Use LAN cable that is compatible with category 5 or above.•Check 2 Wired LAN settingsIs your wired LAN switched on?•Is your wired LAN adapter properly recognized?•Is your wired LAN adapter switched on?•Install the wired LAN adapter driver beforehand.•For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter.Wireless LAN Check 1 Wireless LAN settingsIs your wireless LAN switched on?•Is your wireless LAN adapter properly recognized?•Is the wireless LAN adapter switched on?•Install the wireless LAN adapter driver beforehand.• For details on how to install the driver, refer to the instructions accompanying the wireless card.Check 2 Computer’s settingsWhen security (rewall) software and utilities for network cards are installed, these may prevent connection of• the Display.Is Network Bridge enabled?•Has your rewall been disabled?•For WebBrowser WebBrowser is necessary to use WEB control.•Compatible OS : Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6/v10.7•Compatible WebBrowser : Internet Explorer 7.0/8.0/9.0, Safari 4.0/5.0 (Mac OS)•