5Notes on Using Wireless ConnectionWireless connection function of the Display uses radio waves in the 2.4 GHz band.A radio station license is not required, but be sure to read and fully understand the following items before use.The wireless module (part number: ET-WM200U) sold separately needs to be mounted when using the wireless LAN functionwith the Display.Do not use near other wireless equipment. The following equipment may use radio waves in the same band as the Display.When the Display is used near these devices, radio wave interference may make communication impossible, or thecommunication speed may become slower.Microwave ovens, etc.•Industrial, chemical and medical equipment, etc.•In-plant radio stations for identifying moving objects such as those used in factory manufacturing lines, etc.•Designated low-power radio stations•If at all possible, avoid the use of cellular phones, TV sets or radios near the Display. Cellular phones, TV sets, radios and similar devices use different radio bands from the Display, so there is no effect onwireless communication or the transmission and reception of these devices. However, radio waves from the Display mayproduce audio or video noise.Wireless communication radio waves cannot penetrate steel reinforcements, metal, concrete, etc.Communication is possible through walls and floors made from materials such as wood and glass (except glass containingwire mesh), but not through walls and floors made from steel reinforcements, metal, concrete, etc.Avoid using the Display in locations prone to static electricity. If the Display is used in a location prone to static electricity, such as on a carpet, the wireless LAN or wired LAN connectionmay be lost.If this happens, eliminate the source of static electricity or electromagnetic noise and reconnect to the wireless LAN orwired LAN.Using the Display outside the country It is forbidden to take the Display outside the country or region where you purchased it, so use it only in the said country orregion. Also, note that depending on countries or regions there are restrictions on the channels and frequencies at whichyou can use the wireless LAN.