Panasonic TH-42LF5E Operating Instructions And Owner's Manual

Also see for TH-47LF5W: Product specification

Panasonic TH-42LF5E Operating Instructions And Owner's Manual Manual pdf 38 page image

Options 1/3On screen displayInput SearchOnOffOff00Maximum VOL levelInitial VOL levelOffInput lockOffButton lockOffRemocon User levelInitial input OffOptionsEnableOff-timer functionNormalInitial Power Mode0ID selectOffRemote IDOffSerial IDOffStudio W/B2/33/3OptionsOffPower ON Screen DelayFunction button assign 1Power On Message (No activity power off)OnSignalFunction button assign 2 Screensaver38Options AdjustmentsItem AdjustmentsInput Search Set auto input switching for when there is no signal. (see page 40)On screen displayOn: Displays all the following on screen.• Power on display• Input signal switch display• No signal display• Mute and the remaining time of off-timer after was pressed.Off: Hides all the items above from view.Initial inputAdjusts the input signal when the unit is turned on.Off PC DVI HDMI OffNotes:• Only the adjusted signal is displayed. (see page 15)• This menu is available only when “Input lock” is “Off”.Initial VOL levelPress button to adjust the volume when the unit is turned on.Off OnOff: Sets normal volume.On: Sets your preferred volume.Notes:• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.Maximum VOL levelPress button to adjust the maximum volume.Off OnOff: Sets auto maximum volume.On: Sets your preferred maximum volume.Notes:• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automaticallybecomes the same as the “Maximum VOL level”.• The volume display can go up to 100 regardless of the settings.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.1 Press to display the Setup menu.5 Press to exit from Options menu.243Press to select “OSD Language”.Press for more than 3 seconds.Press to select “Options”.Press to display the Options menu.Press to select your preferred menu.Press to adjust the menu.OptionsShipping