Panasonic TH-42LF5E Operating Instructions And Owner's Manual

Also see for TH-47LF5W: Product specification

Panasonic TH-42LF5E Operating Instructions And Owner's Manual Manual pdf 36 page image

Noise reduction Off36Setup for Input SignalsyXGA Mode 1024 × 768Note:After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu asnecessary. (see page 21)XGA ModeThis menu is displayed when the PC IN input signal is selected. This menu sets two types of XGA signals with 60Hzvertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz and1,366 × 768 @ 60Hz).When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @60Hz XGA input signal irrespective of this setting.Press to select “XGA Mode”.Press to select “1024×768”, “1366×768”.Press to select “Noise reduction”.Press to select “Off”, “Auto”, “Min”, “Mid”, “Max”.Auto: Noise reduction will be automatically selected from “Min”,“Mid” or “Max”.Noise reductionNote:Noise reduction can be adjusted while a Component signal from PC IN terminal is being applied.SyncSignal [ RGB ]Cinema realityXGA ModeAutoOff1024 ×768This function operates only during input from PC IN terminal.Conrm that the input is set to RGB input (this setting is valid only for RGB input signal).Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.However, the synchronized signal that is input rst is selected.on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.SyncPress to select the “Sync”.Press to adjust.