Setting for USB HDDFormat and set up the USB HDD with this TV in order to use it for recording.All the USB devices recognised as a mass storage device are listed.● Please note that USB HDD will be formatted and all data in it will beerased after this setup.● Before setting, connect the USB HDD and be sure to turn on the USBHDD.Recording > USB HDD setup > Preparations1. Display the menu with MENU.2. Select Setup > USB Device Setup and press OK to access.3. Select the USB HDD for recording and press OK to start setup.● Some USB HDD may not be displayed.● To display information of the highlighted deviceINFO4. When the caution and confirmation screen for using USB HDD isdisplayed, select Yes and press OK to proceed.5. When a confirmation screen of USB HDD name is displayed, select Yesand press OK to set.● The name for the USB HDD is created automatically. If you want to editthe name, select Yes.1) Enter characters with Cursor buttons or Numeric buttons, and pressOK to set.2) Press RETURN to store.6. When a confirmation screen to enable USB HDD for recording isdisplayed, select Yes and press OK to set.● If another formatted USB HDD for recording already exists, thisconfirmation screen will be displayed to switch to enable this USB HDDfor recording.- 90 -
