Timer ProgrammingThis function allows you to select programmes that you want to be remindedto watch or record to the USB HDD.1. Select the forthcoming programme and press OK to access.2. Select USB HDD Rec. / Reminder and press OK to set.● To check / change / cancel a timer eventRecording > Timer Programming > Editing Timer Programming● LED turns to orange in Standby mode when Timer Programming is set.● To return to TV GuideRETURN● If you select the current programme, a confirmation screen askingwhether you want to watch or record the programme appears. SelectTimer Programming and press OK to set USB HDD Rec. to record fromthe time you finish the timer event setting.= Note =● Not valid in Analogue TV● Timer Programming only works reliably if correct time information isreceived via the signal from the broadcaster or service provider.● Depending on the progress of recording, analogue channel may not beselected.● When recording programmes to the USB HDD, be sure to format the USBHDD and enable it to record in USB Device Setup.Recording > USB HDD setup● To set timer programming events of this TV on the network equipment(smartphone, etc.) from outside the home networkRecording > Timer Programming > Remote recording- 77 -
