Panasonic TH-103PF12E Service Manual

Also see for TH-103PF12E: Specifications Operating instructions Service manual

Contents

Panasonic TH-103PF12E Service Manual Manual pdf 17 page image

17TH-103PF12E7 Troubleshooting Guide7.1. Self Check7.1.1. Display Indication1. Self-check is used to automatically check the bus linecontrolled circuit of the Plasma display.2. To get into the Self-check mode, press the volume downbutton on the customer controls at the bottom of the set,at the same time pressing the OFF-TIMER button on theremote control, and the screen will show.If the IIC ports have been checked and found to be incorrectOr not located then “ - - ” will appear in place of “OK”“01” in the line of the “PTCT” means the number of blinks of thePower LED is 1. (Reference to 7.1.2)“H09” in the line of the “PTCT” is the error code.To exit the CAT mode switch off the main power.Note:The line of the “PTCT” displays when you get into the Self-check mode for the first time only after the Power LEDblinks.