Panasonic TH-103PB1U Operating Instructions Manual

Also see for TH-103PB1U: Operating instructions Operating instructions Brochure & specs

Contents

Panasonic TH-103PB1U Operating Instructions Manual Manual pdf 43 page image

ECO MODE SETTINGSOFFPOWER SAVEONSTANDBY SAVEDVI-D POWER MANAGEMENT OFFPC POWER MANAGEMENT OFFCUSTOMECO MODENO SIGNAL POWER OFF DISABLEMenu is displayed. (Example: ECO MODE SETTINGS)Pressing the FUNCTION button clears the menu.43FUNCTION BUTTON SETTINGSSet the functions that operates when is pressed.Select “FUNCTION BUTTON SETTINGS” in “SETUP” menu andpress button.FUNCTION BUTTON SETTINGSTOUCH-PENFUNCTION BUTTON 1ONFUNCTION BUTTON 2FUNCTION BUTTON GUIDESCROLLING BAR• FUNCTION BUTTON 1, FUNCTION BUTTON 2The following functions are set to the FUNCTION button.SCROLLING BARActivates the SCROLLING BAR ONLY screensaver.After 15 minutes, the display enters standby mode.ECO MODE SETTINGS / SIGNAL / ON/OFF TIMER SETUPNote:Factory settings are as follows.FUNCTION1 button: TOUCH-PENFUNCTION2 button: SCROLLING BARTo exit this mode, press button.TOUCH-PEN ON• FUNCTION BUTTON GUIDEThe function display setting for the FUNCTION button is congured.ON: Press the FUNCTION button to display the function list of the button.OFF: The function list is not displayed.INPUT (SLOT)* – INPUT (NETWORK)Simply press to select the input.* “INPUT (SLOT)” is displayed when an optional Terminal Board is installed.When a Terminal Board with dual input terminals is installed, “INPUT (SLOT A)” and “INPUT (SLOT B)” are displayed.TOUCH-PENPress and turn Touch Pen mode ON/OFF.NETWORK SETUP“NETWORK SETUP” menu is displayed.COMPUTER SEARCHThe list of connectable computers on the network is displayed.MULTI-LIVESwitch to the MULTI-LIVE mode when using the “WirelessManager”.AV MUTEMutes the audio and video. To exit this mode, press any button.The operation starts.FUNCTION1:TOUCH-PEN 2:SCROLLING BARNote:For the network function, refer to “Operating Instructions, Network Operations” and the instruction manual of “WirelessManager” in use.