Panasonic TH-103PB1U Operating Instructions Manual

Also see for TH-103PB1U: Operating instructions Operating instructions Brochure & specs

Contents

Panasonic TH-103PB1U Operating Instructions Manual Manual pdf 32 page image

0001/2SOUNDNORMALNORMALIZESTANDARDOFFTREBLEAUDIO MENUBALANCEBASS0MIDSURROUNDSPEAKERSOUTPUT SELECT32SOUND Adjustment1 Press to display the SOUND menu.Press to select the menu to adjust.Select the desired level by listening to the sound.Press to exit from adjust mode.2 Select to adjust each item.While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.Helpful Hint ( / NORMALIZE Normalization)3SDI SOUND OUTPUTThis menu is available only when selecting a slot that any of the following terminal boards is installed:HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-FB11DHD)2/2SOUND OUTLEFT CHANNELRIGHT CHANNELCHANNEL 1CHANNEL 1OFFLEVEL METER OFFSDI SOUND OUTPUT Item DetailsLEFT CHANNEL CHANNEL 1 to CHANNEL 16Selects left audio channel.RIGHT CHANNEL CHANNEL 1 to CHANNEL 16Selects right audio channel.SOUND OUT ON OFFON: Enables audio output.OFF: Disables audio output.LEVEL METEROFF 1-8CH 9-16CHSets audio channels to show in the audio level meter.8 channels are displayed in the audio level meter; 4 channelseach on both right and left sides of the display.OFF: Hides the audio level meter.1-8CH: Displays the audio level meter (1-8ch)9-16CH : Displays the audio level meter (9-16ch)Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.Item DetailsOUTPUT SELECTSelect the audio output.SPEAKERS: Internal speakersAUDIO OUT: AUDIO OUT terminal outputNotes:• If “AUDIO OUT” is selected, only “BALANCE” can be set. The other menus are grayed out and cannot be set.• The audio output options will be displayed when you adjust audio volume.VOLUME (SPEAKERS) 30• Audio volume and “BALANCE” settings are memorized separately for each audio output.AUDIO MENUSTANDARD: Emits the original sound.DYNAMIC: Accentuates sharp sound.CLEAR: Attenuates human voice.BASS Adjusts low pitch sounds.MID Adjusts normal sounds.TREBLE Adjusts high pitch sound.BALANCE Adjusts left and right volumes.SURROUND Select ON or OFF.