IIIHandling the LED screen• Do not leave the LED screen facing the sun as it can damage it. Take care when youplace the TV by a window.• Do not push or scratch the LED screen .Do not place a heavy object on the LEDscreen. This may cause the screen to lose conformity or cause LED panelmalfunctions.• If the TV is used in a cold place, a smear may appear on the screen. This is not amalfunction. The screen will return to normal as its temperature rises to a normaloperating level.• If a still picture is displayed for a long time on the TV screen, ghosting may occur for awhile. The ghosting will eventually disappear.• If the LED panel becomes warm during operation, this is normal and not a malfunction.Handing of broken glass and liquid crystal leakageIf the LED panel is damaged, crystalline liquid leakage may occur, or scattered brokenglass may result. Do not touch broken glass or crystalline liquid (which is toxic). With barehands that have cuts, skin irritation or poisoning may result. If any crystalline liquid getsinto mouth or eyes, rinse thoroughly with and consult your doctor.CAUTION: IF the set is not going to be used for a long period, such as during avacation, unplug the set from the wall outlet to economise power.(If the TV set is plugged in, a slight current still flows, even with thepower button in OFF position)Handing of broken glass and liquid crystal leakageIMPORTANT NOTICEThis product composes up to 6.0 million cells and a few cell defects mayoccur In the manufacture of the panel. Several dead pixels (allow up to 2bright or 2 dark pixels) on the panel are deemed acceptable by the industrystandards. In line with manufacturers and would not mean that thepanel is faulty. Dead pixels panels with 6 pixels or more within 12 monthperiod, Palsonic Corporation Pty Ltd. complies with industry standardand reserves the right to repair the unit and non-refundable. We hope youwill understand that the product that corresponds to this standard isregarded as acceptable.