TroubleshootingNo power• Make sure the TV and the power cord are connected correctly.• Check if you pressed POWER on the remote control unit. If the indicator inthe front panel is red, press POWER in the remote control or the frontcontrol panel.LED TV does not operate• External influences such as lightning or static electricity may causeimproper operation. In this case, operate the unit after first turning onthe power, or un plugging the AC cord and plugging it in again after 1to 2 minutes.Power is cut off suddenly• Check if the off timer or sleep timer are set.• The unit’s internal temperature has increased. Remove any objects blockingthe vents and clean them to remove dust.Remote control unit does not operate• Check if the batteries are inserted with the polarity (+,-) correctly aligned.• Check if the batteries are discharged. Please replace with new batteries.• Make sure that you do not use the remote control under strong orfluorescent lighting.• Check if there is a fluorescent light illuminated near the remote controlsensor.• The path of the remote control beam may be blocked; please make sure thepath is clear and that remote control is aimed at the remote control sensorin the TV.Picture is cut off /with side bar screen• Check if the image position is correct.• Check if the screen mode adjustments such as picture size are madecorrectly.Strange color, light color, or color misalignment• Is the room too bright? The picture may look dark in a room that is too bright.• Check the input signal setting.16