Panasonic TC-P65VT30 Service Manual

Also see for Viera TC-P65VT30: Owner's manual User guide Owner's manual Specifications Manual de usuario

Panasonic TC-P65VT30 Service Manual Manual pdf 33 page image

339.26. Remove the C2-Board1. Remove the Contact metal bottom. (See section 9.24.)2. Disconnect the flexible cables (CB4, CB5, CB6, CB7,CB8 and CB9).3. Disconnect the flexible cables (C20, C21 and C26).4. Remove the screws (×4 ) and remove the C2-Board.9.27. Remove the C3-Board1. Remove the Contact metal bottom. (See section 9.24.)2. Disconnect the flexible cables (CB10, CB11, CB12,CB13, CB14 and CB15).3. Disconnect the flexible cables (C31 and C36).4. Disconnect the connector (C35).5. Remove the screws (×4 ) and remove the C3-Board.9.28. Remove the AL frames1. Remove the screws (×14 , ×2 ) and remove the ALframes.2. Remove the screws (×4 each) and remove the Cornerfixing metals.9.29. Replace the Plasma panelCaution:Remove the Plasma panel section from the servicingstand and lay on a flat surface such as a table (coveredby a soft cloth) with the Plasma panel surface facingdownward.A new Plasma panel itself without Contact metals is fragile.To avoid the damage to new Plasma panel, carry a newPlasma panel taking hold of the Contact metals.1. Place a carton box packed a new Plasma panel on theflat surface of the work bench.2. Open a box and without taking a new Plasma panel.3. Attach the Cabinet assy and each P.C.Board and so on,to the new Plasma panel.*When fitting the Cabinet assy, be careful not to allow anydebris, dust or handling residue to remain between theFront glass and Plasma panel.