Panasonic TC-P42XT50 Service Manual

Also see for VIERA TC-P42XT50: Owner's manual Manual de usuario

Panasonic TC-P42XT50 Service Manual Manual pdf 20 page image

208.2.7. Remove the PSS-BoardCaution:To remove P.C.B. wait 1 minute after power was off fordischarge from electrolysis capacitors.1. Disconnect the connectors (P2 and P35).2. Disconnect the bridge connector (A6-P6).3. Disconnect the flexible cables (SS53 and SS55A).4. Remove the screws (×5 , ×1 , ×1 ) and removethe PSS-Board.8.2.8. Remove the A-Board1. Unlock the cable clampers and the tapes to free thecables.2. Disconnect the connectors (A1, A12 and A50).3. Disconnect the bridge connector (A6-P6).4. Disconnect the flexible cables (A20 and A30).5. Remove the screws (×4 ) and remove the Side shieldmetal.6. Remove the A-Board.8.2.9. Remove the Speakers1. Unlock the cable clampers and the tapes to free thecables.2. Disconnect the Speaker terminal.3. Remove the screws (×2 each) and remove theSpeakers (L, R).8.2.10. Remove the SN-Board1. Remove the flexible cables (SN21, SN22, SN23, SN24,SN25, SN26, SN27 and SN28) connected to the SN-Board.2. Disconnect the connector (SN2).3. Disconnect the flexible cable (SN20).4. Remove the screws (×5 ) and remove the SN-Board.