TC-L32X30115.2.5. Self Check Mode1. Press the ‘MENU’ button (on the remote control) and the ‘VOL DOWN’ button on the LCD panel.2. Press ON/OFF button on the panel to Exit.5.2.6. Hotel Mode Adjustment1. Press the ‘VOLUME DOWN’ button on the TV panel and simultaneously press the AV button on the remote control 3 times toenter Hotel Mode.2. Set Hotel mode ‘on/off’, then press ‘EXIT’ to come out.5.2.7. Hotel Mode1. PurposeRestrict a function for hotels.2. Access command to the Hotel mode setup menu.In order to display the Hotel mode setup menu, pleaseenter the following command (within 2 second).[TV] : Vol [Down] + [REMOTE] : INPUT (3 times).Then, the Hotel mode setup menu is displayed.3. To exit the Hotel mode setup menuDisconnect AC power cord from wall outlet.4. Explain the Hotel mode setup menuItem FunctionMode Select hotel mode ON/OFFInput Select input signal modes.Set the input, when each time power is switchedon.Selection :-/RF/HDMI1/HDMI2/HDMI3/Component/Video/PC• Off: give priority to a last memory.Channel Select channel when input signal is RF.Set the channel, each time power is switchedon.Selection :Any channel number or [-].[-] means the channel when turns off.Volume Adjust the volume when each time power isswitched on.Range :0 to 100Vol. Max Adjust maximum volume.Range :0 to 100OSD Ctrl Restrict the OSD.Selection :OFF/PATTERN1• OFF: No restriction• PATTERN1: restrictionFP Ctrl Select front key conditions.Selection :OFF/PATTERN1/ALL• OFF: altogether valid.• PATTERN1: only input key is valid.• ALL: altogether invalid.Pow Ctrl Select POWER-ON/OFF condition when ACpower cord is disconnected and then connected.OFF: The same condition when AC powercord is disconnected.ON: Forced power ON condition.