Panasonic TC-26LE70 Operating Instructions Manual

Also see for TC32LE70 - LCD TV: Operating instructions Operating instructions

Contents

Panasonic TC-26LE70 Operating Instructions Manual Manual pdf 21 page image

40 41FAQs, etc.MaintenanceTechnical InformationDIGITAL AUDIO OUT terminalsYou can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifierto the DIGITAL AUDIO OUT terminals.Caution• Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disableoptical output.• External speakers cannot be connected directly to OUTPUT terminals.• When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When anNTSC channel is selected, the output will be PCM.EZ SyncTM “HDAVI ControlTM”HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 26)• This function may not work normally depending on the equipment condition.• The equipment can be operated by other remote controls with this function on even if TV is in Standby mode.• Image or sound may not be available for the first few seconds when the playback starts.• Image or sound may not be available for the first few seconds when Input mode is switched.• Volume function will be displayed when adjusting the volume of the equipment.• If you connect the same kind of equipment at once (for example: one DIGA to HDMI 1 / another DIGA to HDMI 2),EZ SyncTM is available for the terminal with the smaller number.• If you connect the equipment that has “HDAVI Control 2” function to the TV with HDMI cable, the sound fromDIGITAL AUDIO OUT terminal can be output as multi channel surround.HDMI connectionHDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connectingthe TV unit and the devices.HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connectedto the HDMI connector using an HDMI compliant (fully wired) cable.• HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.• If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).• When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.• Audio settings can be made on the “HDMI 1 in” or “HDMI 2 in” menu screen. (p. 22)Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz(*1): The HDMI logo is displayed on an HDMI-compliant device.(*2): Enquire at your local digital equipment retailer shop.Caution• Use with a PC is not assumed.• All signals are reformatted before being displayed on the screen.• If the connected device has an aspect adjustment function, set the aspect ratio to “16:9”.• This HDMI connector is “type A”.• These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.• A device having no digital output terminal may be connected to the input terminal of either “COMPONENT”, “S VIDEO”, or“VIDEO” to receive analog signals.• The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i and 1080p.Match the output setting of the digital device.• For details of the applicable HDMI signals, see next page.horizontalfrequency (kHz) verticalfrequency (Hz) COMPONENT HDMI525 (480) / 60i 15.73 59.94 * *525 (480) /60p 31.47 59.94 * *750 (720) /60p 45.00 59.94 * *1,125 (1,080) /60i 33.75 59.94 * *1,125 (1,080)/60p 67.43 59.94 *1,125 (1,080)/60p 67.50 60.00 ** Mark: Applicable input signal for Component (Y, P B, PR ) and HDMI• Signals other than those shown above may not be displayed properly.• The above signals are reformatted for optimal viewing on your display.Input signals that can be displayedNotePicture mode• Vivid (default): Provides enhanced picture contrast and sharpness for viewing in a well-lit room.• Standard: Recommended for normal viewing conditions with subdued room lighting.• Cinema: For watching movies in a darkened room. It provides a soft, film-like picture.• Custom: Customizes each item according to your taste.Technical Information (Continued)MaintenanceDisplay panelThe front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth ora soft, lint-free cloth.• If the surface is particularly dirty, soak a soft, lint-free cloth in diluted neutral detergent (1 part detergent diluted by100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surfaceof the display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.• Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contactwith volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may beadversely affected.First, unplug the Power cord plug from the wall outlet.Power cord plugWipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.)CabinetIf the cabinet becomes dirty, wipe it with a soft, dry cloth.• If the surface is particularly dirty, soak a soft, lint-free cloth in diluted neutral detergent (1 part detergent diluted by100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surfaceof the display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.• Do not allow any detergent to come into direct contact with the surface of the LCD TV.If water droplets get inside the unit, operating problems may result.• Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of thecabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periodsin contact with articles made from rubber or PVC.Pedestal• CleaningWipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water towhich a small amount of neutral detergent has been added and then wipe with a dry cloth.Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surfacecoating. (If using a chemically-treated cloth, follow the instructions supplied with the cloth.)• Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-termcontact with rubber, vinyl products, or the like. (Doing so will cause deterioration.)

/ 24

Related manuals for Panasonic TC32LE70 - LCD TV