14 15Quick StartGuide Identifying ControlsBasic Connection (TV + Home Theater + DVD Recorder)To connect HDMI terminalsDEMOSUBSUBMENUMENU-1 2AV INIdentifying ControlsRemote control sensorWithin about 23 feet (7 meters) in front of the TV set.Power indicator (on: red, off: no light)• The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet.NoteVolume up/downMenu navigationsSwitches TV to On or StandbyChanges the input mode (p. 20)Displays Sub Menu (p. 18, 24)Colored buttons(used for various functions)(for example p. 30)Channel up/downChanges aspect ratio (p. 19)Operates the Favorite channel listfunction. (p. 19)Switches to previously viewedchannel and input modes.EZ Sync menu (p. 21, 26-27)Selects Audio Mode for TV viewing(p. 18)Displays Main Menu (p. 22)Exits menusSelects/OK/ChangeReturns to previous menuVolume up/downDisplays or removes the channelbanner (p. 18)Sound mute On/OffNumeric keypad to select anychannel (p. 18) or press to enteralphanumeric input in menus.(p. 20, 21, 28, 30)Direct channel access for DTV andDBS (p. 18)POWER buttonSwitches TV/VIDEO Selects channelsin sequenceBasic Connection (Continued)Home TheaterDVD RecorderTVDIGITALAUDIO INDVD RecorderHome Theater(AV amp)Back of the TVHDMIAV OUTHDMIAV INHDMIAV OUTNoteHome theater(DIGITAL AUDIO IN)When listening toTV audio[ATSC only]• It is recommended that you usePanasonic’s HDMI cable. (P.26)• When Using the COMPONENTVIDEO OUT terminals or theS VIDEO OUT terminal, refer to p.13“To use COMPONENT terminals” or“To use S VIDEO terminals”.• If you connect RAM theater or Playertheater with HDMI cable, use audiocable instead of the optical digitalaudio cable. (see p.37)Demonstrates picture quality in vivid mode.(Press any key to cancel the demo.)Connecting Home Theater and DVD recorderExample 4