Panasonic TC-23LX60 Operating Instructions Manual

Also see for TC-23LX60, TC-26LX60C, TC-26LX60L, TC-32LX60C, TC-32LX60L: Operating instructions Operating instructions manual Operating instructions Service manual Manual de instrucciones

Contents

Panasonic TC-23LX60 Operating Instructions Manual Manual pdf 19 page image

19AdvancedControl with HDMI “HDAVI Control™”Operating Peripheral EquipmentOther adjustOffStandardAuto power onPower saveCtrl with HDMIOffProg-out stopOnSetupLanguageCCInput labelsOther adjustProgram channelMenuSetupLockAudioPictureNewer Panasonic audio-video products with HDMI output connections can be controlled using the TV’sremote. Limited features such as automatic switching to the TV’s HDMI input are available.• This feature is limited to models incorporating Panasonic’s “Control with HDMI”. Refer to the individual instructionmanuals for compatibility information.• Non-HDMI-compliant cables cannot be utilized.• It is recommended that you use Panasonic’s HDMI cable.Recommended part number: RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m)[for TC-23LX60, TC-26LX60C and TC-32LX60C only]Display menuSelect “Ctrl with HDMI”Select “Setup”Select “On” or “Off”ŶPress to exit or return to previous screenSelect “Other adjust”When “Ctrl with HDMI” is set to “On”, at the start of DIGA playback, the TV’s inputautomatically switches to the input corresponding to the playback equipment.• If using DIGA operation, the TV’s input automatically switches to DIGA and the DIGA menuis displayed. If the TV’s power is Off, it is automatically switched On.When “Ctrl with HDMI” is set to “On”, the TV is automatically turned on and switched to theappropriate HDMI input whenever a “Control with HDMI” compatible DIGA (Panasonic DVDRecorder) is initially turned on and Play mode is selected.When “Ctrl with HDMI” is set to “On” and the TV is turned off, the connected DIGA (PanasonicDVD Recorder) is also automatically turned off.• DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.Power offlinkPower onlinkAutomaticinputswitching• Before using HDMI control functions, the connected equipment (DIGA) must also be set. For details, see theoperation manual for each piece of equipment.• For equipment connection details, see p. 20.• Default setting is “On”. If no HDMI equipment is connected or standard HDMI equipment (non- “Control withHDMI”) is used, set to “Off”. (see below)Note45123selectnextselectnextselectchangeControl with HDMI “HDAVI Control™”• “Control with HDMI” function does not work in countries other than the USA and Canada.• The TV remains on even if the “Control with HDMI” compatible equipment is turned off.Caution