Panasonic TC-20KL05P Service Manual

Contents

Panasonic TC-20KL05P Service Manual Manual pdf 9 page image

- 9 -TC-20KL05PTABLE CHK1ValuesC00000B306010009OPTION1OPTION2OPTION3OPTION4OPTION5OPTION6OPTION7OPTION8DAC CONTROL FOR GP31 CHASSIS FUNCTIONS AND ADJUSTMENTSCHK1 MODE - OPTIONSOn CHK1 mode it is possible to adjust the items of the table shown here.Note:To select an option, type “4” to move forward and “3” to move back.After having selected the desired option, adjust it by pressing the “VOL(_)” or “VOL(+)”keys.Press “0” to memorize the adjustment.Observation:Values of CHK1 table in should be programed, exactly as described in the tableshown here.HOW TO RESET THE UNIT (SELF CHECK)To reset the unit, press simultaneously “VOLUME (–)” on the front panel and “TIMER” on the remote control.HOW TO ENTER IN THE SERVICE MODE:1. Adjust “OFF TIMER” to 30 minutes.Press simultaneously “VOLUME (–)” on the front panel and “RECALL” on the remote control to enter “SERVICEMODE”.After a couple of seconds, the expression “CHK1” should appear on the right superior side of the TV screen.2. To change to memory data, press ”MUTE” and ”VOLUME(_)” simultaneously while the OSD is still on CHK1 mode.3. Press key “2” to move forward and “8” to move backward each page (8h positions) in the memory.Exemple: Memory position is 100. After pressing “2” the cursor will go to position 0F8 and after pressing “8” the cursorwill go to position 108 .4. Press “4” and “6” to move to right or left.5. Press “CH(+)” e “CH(–)” to move for blocks.Example: Initial memory position is 000. By pressing “CH(+)” cursor will go to position 100, pressing it once again thecursor will go to position 200. The key “CH(–)” does the inverse move.6. To change values in the memory, press “VOLUME(+)” to increase and ”VOLUME(_)” to decrease.7. After data adjustment, OSD will change to RED color. Press “0” to memorize the adjustment and the OSD will change toGREEN color.NOTE:To alter from CHK1 mode to CHK2, CHK3 or CHK4 mode, press key “2” to move forward and key “1” to move back, asilustrad below.Turn OffNORMAL MODE SERVICE MODEOPTION CODESETTING“2 ”“1 ”VCJADJUSTMENTCHK1 “ 2 ” “ 2 ”“1 ” “ 1 ”PINCUSHIONADJUSTMENTWHITE BALANCEADJUSTMENTCHK2 CHK3 CHK4