MINUS ONEYou can mute a specified part of the song data. Whenyou wish to play the keyboard in time with the song, youcan mute one part, and the other parts become your back-ground when the song data is played back.1. Press the MINUS ONE button.• The display looks similar to the following.2. Use the TRANSPOSE/PROGRAM buttons to specifythe part number (it flashes) of the part you wish tomute.• After a few seconds, the display returns to the previousdisplay.• To cancel the mute function, press the MINUS ONEbutton again.Save your recorded songThe recorded contents of this instrument’s SONG memory can be stored on a floppy disk. Only one song can berecorded in this instrument’s memory, but several songs can be saved in one floppy disk.SONG SAVEThe SONG recorded contents, PANEL MEMORY storedsettings, and the current panel settings, etc. are all storedwhen you save a song to a disk.• If you attempt to save a song to an unformatted disk,“UNFORMAT” is shown on the display. Follow theDISK FORMAT procedure to format the disk. (Referto page 40.)1. Record your performance with the SONG function.2. Press the DISK MENU button.3. Use the TRANSPOSE/PROGRAM buttons to select 1:SONG SAVE.4. Press the EXECUTE button.• The display looks similar to the following.5. If necessary, assign a song name (up to 6 characters).• Use the TEMPO/PROGRAM buttons to specify thecharacter position, and the TRANSPOSE/PROGRAMbuttons to select the alphanumeric character. Repeatthese steps to enter the whole name.• If you wish to erase all the characters, press bothTRANSPOSE/PROGRAM buttons at the same time.6. Press the EXECUTE button.7. Use the TRANSPOSE/PROGRAM buttons to specifythe song (file) number to save to (001 to 100).MINUSONETEMPOCONDUCTORTRANSPOSEVOLUMER1 R2 L CTOUREVCHOHARSUSXBSINTRO / ENDINGSYNCHROAPCCOUNTGENERALCHORDR11 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16MINUSONEPROGRAMDIRECTPLAYMENUDISKGENERALDISKEXECUTEGENERALDISKPart IV Disk Drive38QQTG0588