Panasonic SX-KC611 Owner's Manual

Also see for SXKC611 - ELECTRONIC KEYBOARD: Owner's manual

Multiplex recordingMultiplex recording of the MELODY mode and APCREAL mode is possible by repeating steps 1 to 6.• In multiplex recording, recording cannot be started byplaying the keyboard. You must press theSTART/STOP button to begin recording.Playing back your recorded song1. In the SONG section, press the PLAY button.• This step is not necessary if the PLAY indication al-ready appears on the display.2. Press the PLAY/PAUSE (START/STOP) button.• Your recorded performance is played back.• For information about the function of each buttonduring playback, refer to page 37.• If you wish to play back the rhythm, turn the PLAYbutton off.Store a chord progressionStore the chord progression for the AUTO PLAY CHORD in the track for the CHORD part. Then, when the AUTOPLAY CHORD is used during playback, even if you do not specify the chords with your left hand, the chords changeautomatically.• The chord length is specified with the CHORD STEP RECORD keys on the keyboard.• Note that executing this procedure will delete the recorded APC REAL data.RECPLAYSONGNote value keysw Whole noteh. Dotted half-noteh Half-noteq. Dotted quarter-noteq Quarter-notee Eighth-noteReset keyPress to begin storing from the beginning.Correction keysMove back one step.Move forward one step.Repeat keyPress to end the chord-storing procedure andto specify automatic repeat playback of thestored progression.End keyPress after the whole chord progression hasbeen stored.DELETE keyDELETE Press to erase data.• To erase all the data from the current track, whilepressing the DELETE key, press the End key( ).wh .hq .e q&DELETE&stPart III Recording34QQTG0588