Panasonic SL-SV500 Operating Instructions Manual

Contents

Panasonic SL-SV500 Operating Instructions Manual Manual pdf 6 page image

6Listening to the RadioOPR OFFMEMORY/RECALLTUNINGMODEFM MODEMONO/ST30 STATION MEMORYPORTABLE CD PLAYERSL-SV500VOLVOLS-XBSRADIO/BANDFM RECEPTCITY/NORMODEËOPENHOLD4 712 LR 3 5,6HOLDTUNINGMODEVOLVOLOPR OFFRADIO/BAND1 Release [HOLD].2 Connect the stereo headphones /stereo ear-phones to [Ë].(Plug in firmly.)3 Press [RADIO/BAND] to turn on the radio.4 Press [TUNING MODE] to set to Free Mode.The display in Free Mode is as follows.5 Press [RADIO/BAND] to change the band.Each time the button is pressed;FM (----. AM6 Press [9/i, :/j] to select the frequencyof the station.9/i : increases frequency:/j : decreases frequencyFor your reference:≥Press for over 1.5 seconds to make the frequency changerapidly.≥“TUNED” is displayed when a station is tuned.7 Adjust the volume.∫ To turn off the radio∫ Press [∫, OPR OFF].Putting stations into the channelsFrequencies of up to 30 stations can be stored; 20 FM and 10 AM.Preparation:≥Release [HOLD].≥Connect the stereo headphones/earphones as they act as an FM antenna.1 Press [RADIO/BAND] to turn on the radio.2 Press [TUNING MODE] to set to Memory Mode.The display in Memory Mode is as follows.3 Press [RADIO/BAND] to change the band.Each time the button is pressed;FM (----. AM4 Put stations into the channels of your choice.1Press [MEMORY/RECALL].1The frequency number flashes.2Within 10 seconds1Press [9/i, :/j] to select the frequency to be memorized.3Within 10 seconds1Press [MEMORY/RECALL].1The memory number flashes.4Within 10 seconds1Press [9/i, :/j] to select the memory number to store the frequency.1FM station: up to 20/AM station: up to 101≥Press [9/i, :/j] for over 1.5 seconds to make the frequency or memory numberchange in succession.5Within 10 seconds1Press [MEMORY/RECALL] to confirm the memory setting.∫ Recalling preset stationsPreparation:≥Release [HOLD].≥Connect the stereo headphones/earphones to [Ë].≥Perform steps 1–3 of “Putting stations into the channels”.1 Press [9/i, :/j] to select the desiredstation.Memory number and broadcast frequency changes.2 Adjust the volume.∫ To erase unnecessary preset stations from thememoryPreparation:Perform steps 1–3 of “Putting stations into the channels”.1 Press [9/i, :/j] to select the memorynumber to be erased.2 1Press [MEMORY/RECALL].1The frequency number flashes.2Within 10 seconds1Press and hold [MEMORY/RECALL] until “-- --”flashes.3Within 10 seconds1Press [MEMORY/RECALL] to erase thememory number.1The memory number of the next preset station appears onthe display.∫ To put a station into a channel you erased∫ Repeat the procedure described at left.∫ To turn off the radio∫ Press [∫, OPR OFF].Free ModeYou can tune directly to the station in Free Mode by finding the station’s frequency, or you can store the station in Memory Mode to make tuning simpler.You can choose these modes with [TUNING MODE].21 3 5 2 4OPR OFF31,MEMORY/RECALLOPR OFFMEMORY/RECALLTUNINGMODEFM MODEMONO/ST30 STATION MEMORYPORTABLE CD PLAYERSL-SV500VOLVOLS-XBSRADIO/BANDFM RECEPTCITY/NORMODEËOPENHOLDTUNINGMODERADIO/BANDMemory numberCS-XBSAUTO RANDOMMEMORYFMAMVOLMONOCITYTUNEDSORRY1 MCS-XBS RANDOMMEMORYAMVOLMONOCITYTUNEDSORRYMMemory ModeImportantAfter putting stations into channels, ensure the unit has aconstant power supply. Leaving it without batteries or ACpower for more than one minute can clear the memory.Plug type:3.5 mm (1/8in.) stereo

/ 8

Related manuals for Panasonic SLSV500 - PORT. CD PLAYER