Panasonic SC-PT480 Operating Instructions Manual

Also see for SC-PT580: Operating instructions Operating instructions Operating instructions

Panasonic SC-PT480 Operating Instructions Manual Manual pdf 8 page image

8 RQTX1126Conserving powerThis unit consumes a small amount of power, evenwhen it is in standby mode (approx. 0.38 W). To savepower when the unit is not to be used for a long time,unplug it from the household mains socket.You will need to reset some memory items afterplugging in this unit.[Note]The included AC mains lead is for use with this unit only.Do not use it with other equipment. Also, do not usecords for other equipment with this unit.≥Use alkaline or manganese batteries.≥Do not heat or expose to flame.≥Do not leave the battery(ies) in an automobile exposedto direct sunlight for a long period of time with doorsand windows closed.Do not:≥mix old and new batteries.≥use different types of batteries at the same time.≥take apart or short circuit.≥attempt to recharge alkaline or manganese batteries.≥use batteries if the covering has been peeled off.Mishandling of batteries can cause electrolyte leakagewhich can severely damage the remote control.Remove the batteries if the remote control is not goingto be used for a long period of time. Store in a cool,dark place.Aim at the remote control signal sensor (B 4), avoidingobstacles.Distance: Within approx. 7 mAngle: Within approx. 20° up and down, approx. 30° tothe left and rightThe EASY SETUP screen assists you in makingnecessary settings.≥LanguageSelect the language used on menu screen.≥TV aspectSelect the aspect to suit your TV.≥Speaker layoutSelect “Surround layout (Recommended)” mode or“Front layout (Alternative)” mode according to yourspeaker layout (B 6, Installation).≥Speaker checkListen to speaker output to confirm speaker connections.≥Speaker outputMake surround sound setting for speaker output.≥TV audioSelect the audio input connection from your TV.For AUX connection (B 7): Select “AUX”.For HDMI connection (B 7): Select “ARC”.For DIGITAL AUDIO IN OPTICAL connection (B 7):Select “DIGITAL IN”.For SCART (AV) connection (B 7): Select “AV”.This will be the TV audio setting for VIERA Link“HDAVI Control”. (B 16)[Note]≥If this unit is connected to a “HDAVI Control 3 or later”compatible TV via HDMI cable, the menu language andTV aspect information will be retrieved via VIERA Link.≥If this unit is connected to a “HDAVI Control 2”compatible TV via HDMI cable, the menu languageinformation will be retrieved via VIERA Link.≥Settings in the EASY SETUP can also be changedin the player settings (e.g. language, TV aspect,TV audio (B 19)).step 3 AC mains lead connectionBE SURE TO READ THE CAUTION FOR THE ACMAINS LEAD ON PAGE 2 BEFORE CONNECTION.step 4 Preparing the remote controlBatteriesCAUTIONDanger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent typerecommended by the manufacturer.Dispose of used batteries according to themanufacturer’s instructions.UseAC INTo household mains socketThis unit(rear)AC mains lead (included)R6/LR6, AAPress in and lift up.Replace the cover.Insert so the poles (r and j) match those in theremote control.step 5 EASY SETUPPreparationTurn on your TV and select the appropriate video inputmode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit theconnection to this unit.≥To change your TV’s video input mode, refer to itsoperating instructions.≥This remote control can perform some basic TVoperations (B 4).1 Press [Í]1 to turn on the unit.≥When the EASY SETUP screen appearsautomatically, skip steps 2 to 7.2 Press [DVD]5 to select “DVD/CD”.3 Press [START]C to show the START menu.4 Press [3, 4]9 to select “Setup” and press[OK]9.5 Press [3, 4]9 to select “OTHERS” and press[OK]9.6 Press [3, 4]9 to select “EASY SETUP” andpress [OK]9.7 Press [OK]9 to select “SET”.8 Press [3, 4]9 to select “Yes” and press [OK]9.9 Follow the messages and make the settingswith [3, 4, 2, 1]9 and [OK]9.(B below, EASY SETUP settings)10 Press [OK]9 to finish EASY SETUP.EASY SETUP settingsSETMAINDISCVIDEOAUDIODISPLAYHDMIOTHERSRETURNMenu