Panasonic SC-HC39 Owner's Manual

Also see for SC-HC39: Operating instructions

Contents

Panasonic SC-HC39 Owner's Manual Manual pdf 13 page image

13RQT9882 ENGLISHOthersAs a factory default, this unit will turn to standbymode automatically if there is no sound and it is notbeing used for approximately 20 minutes.To cancel this function1 Press [SETUP] repeatedly to select“AUTO OFF”.2 Press [3, 4] to select “OFF” and then press[OK].≥ To turn the function on, select “ON” in step 2.≥ This setting cannot be selected when “FM” is the source.≥ When connected to a Bluetooth® device, the functiondoes not work.When “SC-HC39” is selected from a pairedBluetooth ® device’s Bluetooth® menu, this unit willturn on automatically from standby mode andestablish a Bluetooth ® connection.1 Press [SETUP] repeatedly to select“BLUETOOTH STANDBY”.2 Press [3, 4] to select “ON” and then press[OK].≥ To turn the function off, select “OFF” in step 2.When other Panasonic equipment responds to thesupplied remote control, change the remote controlcode.1 Press [CD] to select “CD”.2 While pressing and holding [SELECTOR] onthe unit, press and hold [CD] on the remotecontrol until the unit’s display shows“REMOTE 2”.3 Press and hold [OK] and [CD] on the remotecontrol for at least 4 seconds.≥ To change the mode back to “REMOTE 1”, press [CD] toselect “CD” and then repeat the step 2 and 3 but replace[CD] with [ ].Occasionally, Panasonic may release updatedsoftware for this unit that may add or improve theway a feature operates. These updates areavailable free of charge.For more details, refer to the following website.http://panasonic.jp/support/global/cs/(This site is in English only.)∫ Checking the software versionThe version of the installed software is displayed.Press [SETUP] repeatedly to select “SW VER.” andthen press [OK].≥ Press [OK] to exit.Auto off functionBluetooth ® standbyChanging the unit and remotecontrol codeSoftware update