Panasonic SC-BT300 Operating Instructions Manual

Also see for SC-BT200: Easy setting guide Operating instructions Operating instructions Operating instructions Easy setting guide

Contents

19RQT9508Basic operations∫ To adjust the volume.It is also possible to adjust the volume with the volume knob on themain unit.∫ To mute the sound.Instructions for operations are generally described using the remote control in these operating instructions.PreparationTurn on the TV and select the appropriate video input on the TV.1 Press [Í] to turn on the unit.2 Insert the media. (B see above)Play starts.≥If play does not start, press [1PLAY].≥If a media with data in different file formats is inserted, the file selection menu is displayed. Press [3, 4] to select the desired file formatand press [OK].≥If a menu is displayed, press [3, 4, 2, 1] to select the item and press [OK].≥If the screen prompting you to use the color buttons appears, continue to operate with the color buttons on the remote control.VOLUMESURROUND OUTPUTTUNESELECTORSETUP MICSD CARDSELECTOR Stop Play,VOLUMESkip/Search/Slow-motionSD CARDHeadphones (not included)Headphone plug type: ‰3.5 mm (1/8z) stereo mini plug≥Reduce the volume before connecting.≥Audio is automatically switched to 2-channel stereo.≥To prevent hearing damage, avoid listening for prolonged periods of time.Excessive sound pressure from earphones and headphones can cause hearing loss.Label facing up1 Press [< OPEN/CLOSE] to open the disc tray.2 Insert or remove the disc.Inserting or removing an SD card.≥To remove the card, press on the center of the cardand pull it straight out.≥Press [< OPEN/CLOSE] again to close the tray.≥Insert double-sided discs so the label for the side youwant to play is facing up.≥DVD-RAM: Remove the discs from their cartridgesbefore use.Insert the card label up withthe cut-off corner on the right.≥Press on the center of thecard until it clicks into place.Inserting or removing a disc.1 Pull to flip down the front panel.2 Insert the SD card into the SD card slot.Press to adjust the volumePress to mute the sound“MUTE” flashes on the unit’sdisplay.≥To cancel, press [MUTE] again oradjust the volume.≥Muting is canceled if the unit isturned off.e.g.VOLMUTE≥DISCS CONTINUE TO ROTATE WHILE MENUS AREDISPLAYED. Press [∫STOP] when you finish topreserve the unit’s motor and your television screen.≥The producers of the disc can control how discs areplayed. So you may not always be able to control play asdescribed in these operating instructions. Read the disc’sinstructions carefully.≥When playing a set of two or more BD-Video discs, themenu screen may continue to display even if the disc hasbeen ejected.To display menus[BD-V] [AVCHD] [DVD-VR] [DVD-V]Press [TOP MENU/DIRECT NAVIGATOR].To show Pop-up menu [BD-V]The Pop-up menu is a special feature available with someBD-Video discs. This menu may vary with discs. For theoperating method, refer to the instructions for the disc.1) Press [POP-UP MENU].2) Press [3, 4, 2, 1] to select the item and press [OK].≥Pop-up menu also appears by pressing [SUB MENU] andselecting “Pop-up Menu”.≥Press [POP-UP MENU] to exit the screen.≥It may take time to read BD-Video discs that include BD-J(> 54).NOTETIPSPlayback