Panasonic SC-BT300 Operating Instructions Manual

Also see for SC-BT200: Easy setting guide Operating instructions Operating instructions Operating instructions Easy setting guide

Contents

14RQT9508Broadband Network ConnectionsAC power supply cord connection≥Before turning the power on for the first time, be sure to read the preparations for SMART SETUP / EASY SETUP. (> 15)The following services can be used when this unit is connected to the internet via a broadband connection.≥Firmware can be updated (> 32)≥You can enjoy the BD-Live (> 22)≥You can enjoy the VIERA CAST (> 32)≥Use shielded LAN cables when connecting to peripheral devices.≥With installation where your broadband modem is connected directly to your PC, a router must be installed.≥Use a router that supports 10BASE-T/100BASE-TX.≥In case all available connection on your router is being used, a hub or switch can be installed to provide additional connections.≥When operating the VIERA CAST, use high-speed internet service no less than 1.5 Mbps for SD (Standard Definition) and 6 Mbps forHD (High Definition) picture quality by your local broadband company.– If using slow Internet connection, the video may not be displayed correctly.≥After physically connecting this unit to your broadband connection, some configuration is required. (> 33)≥Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.Main unit+ OPTICAL2(STB) 1(TV)LRDIGITAL INCOMPONENTVIDEO OUTYAUX(TV)P RPBSPEAKERS-ANTEXTLOOPAMAV OUTR LCENTER3 Ω 3 ΩWOOFER FRONT6 5 2 1GNDANTLOOPR L3 ΩSURROUND4 3R L3 ΩSURROUND BACK8 7AC INTRANSMITTERDIGITALVIDEOOUTVIDEOOUTAV OUT FM ANT75Ω3 Ω SUB-)(TRANSMITTERDIGITALPUSH PUSHLANStraight LAN cable (not included)InternetBroadband router, etc.Telecommunications equipment(modem, etc.)NOTE1 AC power supply cord[For[the[U.S.A.[and[Canada[Power plug adaptor[For[units[with[PX[printed[on[the[packaging[ If the power plug does not fit your AC outlet,use the power plug adaptor (included).If it still doesn't fit, contact an electrical partsdistributor for assistance.Main unitOPTICAL2(STB) 1(TV)LRDIGITAL INCOMPONENTVIDEO OUTYAUX(TV)P RP BSPEAKERS+-FM ANT ANTEXTLOOPAM75ΩAV OUT)(R LCENTER3Ω 3Ω 3ΩWOOFERSUB- FRONT6 5 2 1GNDANTLOOPR L3ΩSURROUND4 3R L3ΩSURROUND BACK8 7AC INTRANSMITTERDIGITALVIDEOOUT COMPONENTVIDEO OUTYP RP BVIDEOOUT1 AC power supply cord (included)To a household AC outlet110127V 220240VVOLT ADJ[For[units[with[PX[printed[on[the[[packaging[Before connecting the AC power supply cord;[For[units[with[PX[printed[on[the[[packaging[The AC IN terminal isnot polarized.Set the voltage.Use a flat-head screwdriver tomove the voltage selector to the appropriateposition for the area in which this system isused.110127V 220240VVOLT ADJ[For[the[U.S.A.[and[Canada[(AC 120 V, 60 Hz)[For[units[with[PX[printed[on[the[packaging[(AC 110 V to 127 V, 220 V to 240 V, 50 Hz/60 Hz)Connect only after all other connections are complete.Conserving powerThe main unit consumes a small amount of AC power, even when it is turned off ([For[the[U.S.A.[and[Canada[ approx. 0.2 W,[For[units[with[PX[printed[on[the[packaging[ approx. 0.3 W). To save power when the unit is not to be used for a long time, unplug it fromthe household AC outlet.You will need to reset some memory items after plugging in the main unit.NOTETIPSGetting started