Panasonic SC-BT100P-K Operating Instructions Manual

Also see for SABT100 - BLU-RAY DVD HOME THEATER SOUND SYSTEM: Operating instructions

Contents

41RQT9129Card PageiPod operationRadioWireless systemOther difficulties with playbackThe capacity of the SD carddecreased.≥When a BD-Video that supports the virtual package is used, and an SD card is in the slot,data may be written to the SD card. Erase the data by using “BD-Video Data Erase”, formatthe card or use a new card.24MPEG-2 motion pictures andmusic on an SD card cannot beplayed.≥Data that can be played from an SD card are AVCHD and JPEG data. 12The contents of the cardcannot be read.≥The card is not compatible or the contents on the card may be damaged.≥Turn off and then turn on the unit again.12—Cannot charge or operate. ≥Check that the iPod is connected firmly.≥The battery of the iPod is depleted. Charge the iPod, and then operate again.20—Cannot display iPod videos/photos on the TV.≥Make sure that TV is connected to the VIDEO OUT terminal on this unit.≥Operate the iPod menu to make the appropriate video/photo output settings for your TV.(Refer to operating instructions for your iPod.)7—Distorted sound or noise isheard. “ST” flickers or does notlight.≥Adjust the position of the FM or AM antenna.≥Use an outdoor antenna.—36A beat sound is heard. ≥Turn the TV off or move it away from the unit. —A low hum is heard during AMbroadcasts.≥Separate the antenna from other cables. —No sound. ≥Ensure that the digital transmitter is fully inserted into the slot of the main unit.≥Ensure that the wireless system is plugged into the house hold AC outlet and is turned on.Then, check that “[W2S]” or “[W4S]” is displayed on the main unit’s display.≥Ensure that surround selector at the rear of the wireless system is set to the center position.≥Perform the steps bellow.1 While pressing the [9/5] on the main unit, press the numbered button [3] on theremote control until “P” lights in the main unit’s display.≥The indicator on the wireless system turns green.2 While “P” is displayed, press [I/D SET] on the rear of thewireless system.≥If “P” goes off before you press [I/D SET], repeat step 1and then continue the procedure.3 While pressing [9/5] on the main unit, press thenumbered button [3] on the remote control.≥“[W2S]” or “[W4S]” lights on the main unit.4 Turn off and on the wireless system.≥Make sure the indicator on the wireless system lights up green.68, 96—The indicator on the wirelesssystem keeps flashing betweenred and green.≥There is a power supply problem. Consult the dealer. —Audio and video momentarilypause.≥This occurs between playlist chapters or scenes ([AVCHD]).≥When playing a title recorded on both layers, the unit automatically switches between layersand plays the title in the same way as a normal program. However, video and audio maymomentarily cut out when the unit is switching layers.——BD-Video or DVD-Video is notplayed.≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and isnot defective.≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.≥Some BD-Video can only be output with HDMI.Cover32—Picture-in-picture is not playedwith BD-Video. ≥Confirm whether the disc supports picture-in-picture. —The virtual package is notplayed with BD-Video.≥Confirm whether the disc supports the virtual package.≥The inserted SD card does not have sufficient available capacity.≥The SD card is write-protected.≥Sub contents copied to an SD card are provided by the disc producer as a part of theBD-Video content. Even if you record images and audio onto an SD card, it cannot be playedas a virtual package.24—1224Alternative soundtrack andsubtitles cannot be selected.≥The languages are not recorded on the disc.≥You may not be able to use the on-screen menu to change the soundtrack and subtitles onsome discs. Use the disc’s menus to make changes.—14, 24No subtitles. ≥Subtitles are not recorded on the disc.≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.≥When progressive output is on, closed captions cannot be displayed.—30—The subtitles overlap closedcaptions recorded on discs.≥Turn off the subtitles or turn off the closed caption setting on the TV. 30Angle cannot be changed. ≥Angles can only be changed during scenes where different angles are recorded. —The resume play function doesnot work.≥Memorized positions are canceled when– pressing [∫] several times.– opening the disc tray.≥The resume play function may not work depending on the disc.——I/D SETUse a pointedobject.Reference