Panasonic SA-AK230PL Service Manual

Also see for SA-AK230: Operating instructions Operating instructions Service manual Service manual

Contents

Panasonic SA-AK230PL Service Manual Manual pdf 18 page image

Step 1 Lay the unit as shown below.Step 2 Release 2 claws at bottom and 2 claws each side, drawthe front panel ass’y forward.Step 3 Remove volume knob.· Disassembly of Panel P.C.B.Step 1 Detach FFC wire (CN971).Step 2 Disconnect FFC flat cable from the connector(CN1001).Step 3 Remove the 5 screws.Step 4 Remove 10 screws.Step 5 Disconnect connectors (CN2806, CN2803 andCN5950).Step 4 Push the lever upward, and then open the cassette lidass’y (For DECK1 and DECK2).Step 5 Tilt the cassette mechanism unit in the direction ofarrow (1), and then remove it in the direction of arrow (2).· For replacement of Deck Mechanism P.C.B.Step 6 Remove 3 screws.9.10. Disassembly of Front Panel Unit· Follow the (Step 1) - (Step 2) of Item 9.3 - Disassembly of Top Cabinet· Follow the (Step 1) - (Step 6) of Item 9.4 - Disassembly of CD Lid· Follow the (Step 1) of Item 9.5 - Disassembly of Rear Panel· Follow the (Step 1) - (Step 3) of Item 9.6 - Disassembly of the CD Mechanism Unit9.11. Disassembly of Deck Mechanism Unit· Follow the (Step 1) - (Step 2) of Item 9.3 - Disassembly of Top Cabinet· Follow the (Step 1) - (Step 6) of Item 9.4 - Disassembly of CD Lid· Follow the (Step 1) of Item 9.5 - Disassembly of Rear Panel· Follow the (Step 1) - (Step 3) of Item 9.6 - Disassembly of CD Mechanism Unit· Follow the (Step 1) - (Step 3) of Item 9.10 - Disassembly of Front Panel Unit18SA-AK230PL