3RQT79123Caution for AC Mains Lead(For United Kingdom)(“EB” area code model only)For your safety, please read the following text carefully.This appliance is supplied with a moulded three pin mains plugfor your safety and convenience. A 5-ampere fuse is fitted inthis plug. Should the fuse need to be replaced please ensurethat the replacement fuse has a rating of 5-ampere and that it isapproved by ASTA or BSI to BS1362. Check for the ASTA markÏ or the BSI mark Ì on the body of the fuse.If the plug contains a removable fuse cover you must ensurethat it is refitted when the fuse is replaced. If you lose the fusecover the plug must not be used until a replacement cover isobtained.A replacement fuse cover can be purchased from your localdealer.If a new plug is to be fitted please observe the wiring code asstated below.If in any doubt please consult a qualified electrician.IMPORTANTThe wires in this mains lead are coloured in accordance withthe following code:Blue: Neutral, Brown: Live.As these colours may not correspond with the colouredmarkings identifying the terminals in your plug, proceed asfollows:The wire which is coloured Blue must be connected to theterminal which is marked with the letter N or coloured Black orBlue.The wire which is coloured Brown must be connected to theterminal which is marked with the letter L or coloured Brown orRed.WARNING: DO NOT CONNECT EITHER WIRE TO THEEARTH TERMINAL WHICH IS MARKED WITH THE LETTERE, BY THE EARTH SYMBOL Ó OR COLOURED GREEN ORGREEN/YELLOW.THIS PLUG IS NOT WATERPROOF — KEEP DRY.Before useRemove the connector cover.How to replace the fuseThe location of the fuse differ according to the type of AC mainsplug (figures A and B). Confirm the AC mains plug fitted andfollow the instructions below.Illustrations may differ from actual AC mains plug.MaintenanceIf the surfaces are dirtyTo clean this unit, wipe with a soft, dry cloth.≥ Never use alcohol, paint thinner or benzine to clean this unit.≥ Before using chemically treated cloth, read the instructionsthat comes with the cloth carefully.For a cleaner crisper soundClean the heads after every 10 hours of use to assure goodquality playback and recording.Use a cleaning tape (not included).Cassette tape care≥ Tapes exceeding 100 minutes are thin and can break or getcaught in the mechanism.≥ Tape slack can get caught up in the mechanism and shouldbe taken up before the tape is played.≥ Endless tapes can get caught up in the deck’s moving parts ifused incorrectly.CD SelectionChoose CDs with this mark: (A).This unit can play CD-DA (digital audio)format audio CD-R and CD-RW that havebeen finalized (a process that enablesCD-R/CD-RW players to play audio CD-R and CD-RW)upon completion of recording. It may not be able to playsome CD-R or CD-RW due to the condition of the recording.Do not≥ use CDs in irregular shape.≥ use CDs with labels and stickers that are coming off or withadhesive exuding from under labels and stickers.≥ attach scratch-proof covers or any other kind of accessory.≥ write anything on the CD.≥ clean CDs with liquids. (Wipe with a soft, dry cloth.)≥ use CDs printed with label printers available on the market.CAUTION!IF THE FITTED MOULDED PLUG IS UNSUITABLE FORTHE SOCKET OUTLET IN YOUR HOME THEN THEFUSE SHOULD BE REMOVED AND THE PLUG CUTOFF AND DISPOSED OF SAFELY. THERE IS ADANGER OF SEVERE ELECTRICAL SHOCK IF THECUT OFF PLUG IS INSERTED INTO ANY 13-AMPERESOCKET.1. Open the fuse cover with a screwdriver.2. Replace the fuse and close or attach the fuse cover.Fuse coverFigure A Figure BFigure A Figure BFuse(5 ampere)Fuse(5 ampere)A