13RQT7912To turn the timer on[4] Press [ PLAY/REC] to display the timerindicator.Each time you press the button:PLAY: to turn the play timer onREC: to turn the record timer on(The indicator does not appear if the start and finish timeshave not been set.)“E” appears if the clock has not been set.[5] Press [ ] to turn the unit off.The unit must be off for timer to operate.The record timer comes on about 30 seconds earlier thanthe set time.* While the unit is in standby mode and connected to thehousehold mains socket.To change the settings (when unit is on)You can enjoy your desired source after you have set thetimer.Turn the unit off before the timer’s start time.Note:≥ The play and record timers cannot be used together.The Sleep TimerRemote control onlyYou can set the unit to turn off after certain time. (e.g. when youwant to fall asleep while listening to music.)Press [SLEEP] to select the time (minutes).Each time you press the button:Notes:≥ You can use sleep timer in combination with play and recordtimer.≥ Make sure the unit is off before the play and record timer’sstart time.≥ Sleep-off time shall have higher priority than timer-off time.To Operationscancel the timer Press [ PLAY/REC]. (l A)check the settings* Press [CLOCK/TIMER]. (l B)A : When the unit is on to clear the timer indicators fromthe display. (The timer comes on at the set timeeveryday if the timer is on.)B : The settings are shown in the following order:Start time > Finish time > Music source > Volume> Original displayTo Operationschange the times Do steps [1], [2], [3] and [5].change the source orvolume1 Press [ PLAY/REC] to clearthe timer indicator.2 Make changes to the source orvolume.3 Do steps [4] and [5].No display (OFF)## ]n=========== ]n,=====PLAY RECTo Operationscancel Press [SLEEP] to select“SLEEP OFF”.check the remainingtimePress [SLEEP] once.The remaining time is shown forabout 5 seconds.change the setting Press [SLEEP] to select the newtime.SLEEP 120SLEEP OFF#SLEEP 90SLEEP 60SLEEP 30 ## ]n,===]n,===