Panasonic RP-BTS35E Operating Instructions Manual

Also see for RP-BTS35: Owner's manual User manual

Preparation9Connecting a Bluetooth® device1 In the power-off state, press and hold [ ] of this unit until the LED blinks.• The unit starts to search for the Bluetooth ® device for connection, and the LED will blink in blue and redalternately.2 Turn on the power of the Bluetooth® unit, and enable the Bluetooth® function.3 Select “RP-BTS35” from the Bluetooth® device’s menu.• A MAC address (an alphanumeric character string that is displayed byand unique to the device) may be displayed before “RP-BTS35” isdisplayed.• If prompted for a passkey, input the passkey “0000 (four zeros)” of thisunit.4 Check the connection with the Bluetooth ® device on theunit.• The LED will blink in blue and red alternately until the connection with the device is completed. When the LED(blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established)Note• If connection to a device is not established within approximately 5 minutes, the unit will be turned off. Perform pairingagain.• You can pair up to 8 Bluetooth ® devices with this unit. If a 9th device is paired, the device with the oldest connectionwill be replaced. To use it, perform pairing again.Preparation• Place the Bluetooth ® device within approx. 1 m from the unit.• Check the device operation using its operation instructions as required.Pairing (Registration) this unit with the Bluetooth ® device for connectionWhen pairing a device for the first time: approx. 3 secondsWhen pairing a second or subsequent devices: approx. 5 secondsBluetoothBluetooth ONRP-BTS35Devicee.g.Select