Menu
Panasonic PT-TW331RU Operating Instructions Manual
                                                                          |
LANENGLISH - 47 SettingsSelect [LAN] from the Main Menu (see “How tooperate menu” on page 35) and then select theitem from the Sub Menu.NoteThe following settings are set before the projector leaveszthe factory.DHCP OffIP Address 192.168.10.100Subnet Mask 255.255.255.0Gateway 192.168.10.1DNS 0.0.0.0If you want to use a DHCP server, please make sure thatzthe DHCP server is enabled.For more information about the IP Address, SubnetzMask, Gateway, and DNS, please contact your networkadministrator.DHCPSet whether to use DHCP server.Press ▲▼ to select [DHCP].1 )Press ► to display the setting dialog2 ) box.Press ▲▼ to switch [On]/[Off].3 ) Press zgo back to the previous menu.Press ► to confirm.4 ) After selecting [On], the message about LANzrestarting will be displayed. The setting ofDHCP finishes when the message disappears.Press 5 )On The projector will acquire the IPaddress automatically.OffUser must set the [IP Address],[Subnet Mask], [Gateway] and[DNS] manually.IP AddressSelect an IP Address of projector connected tonetwork.Press ▲▼ to select [IP Address].1 )Press ► to display the setting dialog2 )box.Press ▲▼◄► to input digit numbers.3 )Press 4 )Subnet MaskSelect Subnet Mask of projector for networkconnection.Press ▲▼ to select [Subnet Mask].1 )Press ► to display the setting dialog2 )box.Press ▲▼◄► to input digit numbers.3 )Press 4 )GatewaySelect Gateway of projector for network connection.Press ▲▼ to select [Gateway].1 )Press ► to display the setting dialog box.2 )Press ▲▼◄► to input digit numbers.3 )Press 4 )DNSSelect DNS of projector for network connection.Press ▲▼ to select [DNS].1 )Press ► to display the setting dialog2 )box.Press ▲▼◄► to input digit numbers.3 )Press 4 )LAN |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved