About Your Projector20- ENGLISHPreparationConnecting terminals(1) This is a terminal to connect to HDMI signal.(2)This is a terminal to output the RGB signal orYCBCR/YPBPRsignal via or terminal.(3) This is a terminal to input the RGB signal orYCBCR/YPBPRsignal.(4) This is a terminal to input the video signal.(5) This is a terminal to input the audio signal fromthe video equipment connected to the IN> terminal.(6) This is a terminal to input the audio signal fromthe computer connected to the IN> or terminal.(7) This is a terminal to connect to the network.(8)This is a RS-232C compatible terminal toexternally control the projector by connecting acomputer.(9)This is a terminal to input the RGB signal orYCBCR/YPBPRsignal.(10) This is a terminal to output the audio signal inputto the projector.AttentionWhen a LAN cable is directly connected to the projector,zthe network connection must be made indoors.NoteWhen the terminal is connected to azcomputer via a HDMI-DVI conversion cable, it can onlyinput video signal and the analog audio signal can not beinput.51234671098
