Panasonic PN28160A Operation Manual

Also see for PN28160A: Operation manual

Contents

Panasonic PN28160A Operation Manual Manual pdf 8 page image

81. Product OutlineSwitch-M16eG is an all Giga bit Ethernet Switching Hub with management function having 14ports of 10/100/1000BASE-T and two pairs of 10/100/1000BASE-T port and SFP extensionslot, one of which is selectable.11..11.. FFeeaattuurreess Has wire-speed Layer 2 switching function. Ports 1 to 14 are 10/100/1000BASE-T ports corresponding to auto negotiation. Also theirspeed and communication mode can be switched by configuration. Ports 15 and 16 canbe used as a 10/100/1000BASE-T port corresponding to auto negotiation or an SFPextension slot exclusively. Also their speed and communication mode can be switched byconfiguration. All twisted pair ports support straight/cross cable auto sensing function. Simply connectdevices with straight cables, whether it is a terminal or a network device.(This function does not work if the port communication configuration is set at Fixed orLink Aggregation. Ports 1 to 14 are set at MDI-X. (default)) Has a loop detection function, which notifies when a loop occurs with the correspondingport LED and automatically shuts down the looped port. Has a loop detection history function, which notifies when a loop occurs with the correspondingLED and enables a network administrator to identify the looped port after the loop is removed. VLAN function allows free grouping of up to 256 VLANs Fanless design solves noise problem or fan failure. Use of LED indicator switching button saves power consumption of LED lamps. The IEEE802.1p compatible QoS function is supported. Has an Internet mansion function, which ensures security between each door. Power saving mode detects the connection status automatically and saves power consumptionto minimum. Telnet and SSH functions facilitate remote setting change and confirmation. Standard MIB (MIB II, Bridge MIB, etc.) is supported, enabling remote control by usingthe SNMP manager. (For details, refer to Appendix A and Appendix C.) Link aggregation function is supported. Aggregation can be manually configured up to 8ports. Reboot timer function is supported, enabling auto reboot after a scheduled time (24 hoursor less).