|
2794.11. IEEE802.1X Port-Based AuthenticationConfigurationConfigure for the IEEE802.1X port-based authentication function in "Globalconfiguration mode" and "Interface configuration mode." Display the basicinformation by entering "show dot1x port-based " in "Privilegedmode."IEEE802.1X port-based authentication status display commandM24eG# show dot1x port-based -list>NAS ID configuration command. Refer to [3.5.4. RADIUS Configuration] fordetails.M24eG(config)# dot1x nasid NAS ID delete command. Refer to [3.5.4. RADIUS Configuration] for details.M24eG(config)# no dot1x nas-idIEEE802.1X port-based authentication mode configuration commandM24eG(config-if)# dot1x port-auth-mode port-basedAuthentication status initialization commandM24eG(config-if)# dot1x initMaximum resend count configuration commandM24eG(config-if)# dot1x max-req Authentication operation configuration commandM24eG(config-if)# dot1x port-control {auto | force-authorized | force-unauthorized}Local re-authentication interval configuration and enable commandM24eG(config-if)# dot1x re-auth-timer localLocal re-authentication interval configuration and enable delete commandM24eG(config-if)# no dot1x re-auth-timer localRe-authentication status initialization commandM24eG(config-if)# dot1x re-authenticateRe-authentication enable commandM24eG(config-if)# dot1x re-authenticationRe-authentication disable commandM24eG(config-if)# no dot1x re-authenticationWaiting time configuration command after authentication failsM24eG(config-if)# dot1x timeout quiet-period Re-authentication interval configuration commandM24eG(config-if)# dot1x timeout re-authperiod Authentication server timeout configuration commandM24eG(config-if)# dot1x timeout server Supplicant timeout configuration commandM24eG(config-if)# dot1x timeout supp-timeout Authentication request transmission interval configuration commandM24eG(config-if)# dot1x timeout tx-period
|
