Panasonic PN28080K Operation Manual

Also see for PN28480K-ID: Operation manual Operation manual Installation guide

Contents

Panasonic PN28080K Operation Manual Manual pdf 79 page image

79(4) TypeShows the port type.100TX The port type is 10/100BASE-TX.1000T The port type is 10/100/1000BASE-T.1000X The port type is SFP port.(5) AdminShows the current port status. The factory default setting is “Enabled” forall ports.Enabled The port is available for use.Disabled The port is not available for use.(6) LinkShows the current link status.Up The Link is established successfully.Down The Link is not established.(7) ModeShows the port communication speed and duplex mode (full or half).Auto The auto negotiation function is enabled when theport link is down.While the link is up, the string enclosed inparentheses shows the communication speed andfull-duplex/half-duplex mode.1000F The port is in the 1000 Mbps full-duplex mode.100-FDx("100F" under the"Auto" mode)The port is in the 100 Mbps full-duplex mode.100-HDx("100H" under the"Auto" mode)The port is in the 100 Mbps half-duplex mode.10-FDx("10F" under the"Auto" mode)The port is in the 10 Mbps full-duplex mode.10-HDx("10H" under the"Auto" mode)The port is in the 10 Mbps half-duplex mode.(8) FlowCtrlShows the flow control setting.Enabled The flow control is enabled.Disabled The flow control is disabled.