Panasonic PAN1780 Integration Manual

PAN1780 Bluetooth Module 5 Getting StartedModule Integration Guide Rev. 1.1 Page 30 of 44Select the preferred device in the drop down menu (1). For Segger ID please see on3.bottom of the PAN1780 ETU.Click Add HEX file (2).4.Add the example .hex-file from Nordic SDK folder nRF5_SDK_16.0.0_98a08e2 >5.examples > peripheral > blinky > hex (2) with the designation blinky_pca10056.hex.After the .hex-file was loaded successfully in nRF Connect, click Erase & write (3).6. Now the blinky application will be flashed on the PAN1780 ETU. The LEDs LED1,LED2, LED3, and LED4 will start to blink.5.5.2 Segger Embedded StudioThe following description shows how to start developing with PAN1780 and Segger EmbeddedStudio.Open Segger Embedded Studio IDE.1.Click File and select Open Solution….2.Open the solution blinky_pca10056.emProject in the Nordic SDK folder3.nRF5_SDK_16.0.0_98a08e2 > examples > peripheral > blinky > pca10056 > blank >ses.