Panasonic AJ-WM50P Operating Instructions Manual

Operating InstructionsMode d’emploiInstrucciones de funcionamientoWireless ModuleModule sans filMódulo inalámbricoModel No. AJ-WM50PBefore operating this product, please read the instructions carefully, and save thismanual for future use.Avant d’utiliser l’appareil, lire attentivement ce mode d’emploi, et le conserver a desfins de reference ulterieure.Antes de utilizar este producto, lea cuidadosamente las instrucciones y guarde estemanual por si tiene que utilizarlo en el futuro.• Do not connect to wireless networks for which you do not have user privileges.Networks for which you have no user privileges (SSID * 1 ) may be displayed whenan automatic search of the wireless network environment is carried out. This may betreated as an illegal access attempt.• Do not use this product with anything other than Panasonic devices.Loading this product into computers and the like may cause faults or malfunctions.• Do not use in areas where interference from magnetic fields, static electricity or radiowaves may occur. Using this product in the vicinity of any of the following devicesmay lead to signal disruption and a decrease in connection speed.- Microwave Ovens- Cordless Digital Telephones- Locations where wireless LAN devices are concentrated.- Other devices that utilize radio waves in the 2.4 GHz / 5 GHz range(Bluetooth supporting devices, wireless audio devices, game consoles etc.)• Data transmitted using radio waves may be intercepted.• Attach the protective cap when not using this product for long periods or whencarrying this product, and do not directly touch the connector part.• Do not place this product in an extremely hot location or where it will be subject todirect sunlight.• Do not drop this product or subject it to an impact or excessive force.• Do not apply liquids to this product or expose it to liquids.* 1 This is a name used to distinguish specific networks over a wireless LAN.Communication is possible when the SSID is the same for both devices.Possible with this ProductBy inserting this product, wireless LAN functionality can easily be added to anyPanasonic device that supports the wireless LAN option.Method of UseAttach this product to the wireless module connection terminal of a P2 device. Fordetails of how to attach the product to a P2 device, consult the P2 device operatinginstructions or user guide.Part namesWhen this product is not correctly recognized• Check that this product is firmly inserted as far as possible.• Re-insert the product.Contact details for use in the event that the device is not recognized after carrying outthe above actions are displayed on the rear.SpecificationsPower supply 5 V DC ( ) (power supplied via USB2.0 bus)External dimensions(Excluding the cap)16 mm (W) x 8 mm (H) x 41 mm (L)(5/8 inch x 5/16 inch x 1-5/8 inch)Weight (Excluding the cap) Approx. 4.3 g (0.01 lb)Antennas temperature Tx1, Rx1Interface USB 2.0Standards IEEE802.11a/b/g/n/ac CompliantTransmission Formats OFDM, DSSSFrequency Range(Channel)2412 MHz - 2462 MHz (channels 1 - 11)5250 MHz - 5330 MHz (W52, W58)Data Transfer Speed(standard value * 1 )IEEE802.11ac Max. 433 MbpsIEEE802.11n Max. 144 MbpsIEEE802.11a/g Max. 54 MbpsIEEE802.11b Max. 11 MbpsAccess Format Infrastructure ModeAd Hoc Mode * 2Security WPA2-PSK (TKIP/AES)WPA-PSK (TKIP/AES)WEP (64 bit/128 bit)* 1 This is a theoretical speed, and the actual transfer speed may vary dependingon factors such as the usage environment and connection products.* 2 IEEE802.11n is not supported.NoteDepending on the P2 device into which this product is inserted, some modes may notfunction.CapLEDDoes not function even if button is pressedENGLISHPrecautions with regard to safetyWARNING■ Do not use this product near anyone with an implanted cardiac pacemaker.Radio waves may interfere with the operation of the pacemaker.■ Do not use this product in an aircraft.Safety of navigation may be compromised.■ Do not use this product near an automatic door, fire alarm, or other automaticcontrol products.Radio waves from this product may interfere with automatic control systems andcause malfunctions resulting in accidents.■ Do not use this product in hospitals or areas with the medical electronicequipment.Radio waves from this product may interfere with the medical electronic equipmentand cause malfunctions resulting in accidents.■ Keep the device, cap, and module holder out of the reach of small children.The accidental swallowing of the cap may have an adverse effect on the body.- Consult a doctor in the event that ingestion of the cap is suspected.AccessoriesCap x 1 (attached to device)Module Holder x 1For details on using these accessories, consult the camera operating instructions.Before Using the Product• Before using this product, please be aware of the following cases where damage may occur.- Leakage of your private information via this product- Illegal operation of your P2 device via this product by a malicious third-party- Interruption to or halting of the operation of your device via this product by amalicious thirdpartyDevice certificationsThis device is certified to conform to technical standards based on the Radio Act soa radio station license is not necessary for use. However, the Radio Act prohibits thefollowing acts.• Disassembly/modification• Removal or erasing of the standards label attached to the rear of this productCautions during usePlease be aware of the following restrictions when using this product.In the event that these restrictions are not adhered to, Panasonic shall accept noresponsibility whatsoever for accidental damage and the like resulting from the use ofthis product or from this being in an unusable state.• This product is for use as a wireless LAN device only.• This product can only be used in the country or region of purchase.SS0316AM0 -PSPrinted in Japan VQT5M75

/ 4

Related manuals for Panasonic AJ-WM50P