GB38Milk foamer nozzle:Clean the milk foamer nozzle every day that a milk menu drink is prepared.1 Press the left side of the door with the dispenser to open.• When opening and closing the door, the dispenser should be located at theupper position, otherwise the milk hose on the inside will be jammed.2 Pull the milk hose out of the milk foamer. Then fold the lever onthe milk foamer upwards and pull the milk foamer out towardsyou.Lever3 Open the cap from the milk foamer. Then remove the milk foamernozzle from the milk foamer by inserting the rounded end of themeasuring spoon into the slot of the milk foamer nozzle andturning 45° to pull it out. The nozzle is lifted up slightly duringturning, so that it can be removed more easily.CapMilk foamer nozzle4 Clean the milk foamer nozzle with a thin needle.• Do not use a metal brush or nylon brush.5 Mix 250 mL of water with 7.5–15 mL of milk system cleaner.6 Leave all parts of the milk foamer in the cleaner solution for5 hours or over night and rinse well.7 Use the brush of the measuring spoon to clean all parts of themilk foamer nozzle. Make sure that all vents of the milk foamerand its nozzle are cleaned with brush and rinse well.8 Put all parts back together by reversing steps 1–3.How to Clean (Continued)