Note:R The ringer indicator will flash when– a telephone number is dialed usinganother phone which is in PULSEmode, or– someone picks up or hangs upanother phone connected to thesame phone line.This is normal.Adjusting the unit ringer volumeYou can select the ringer volume toHIGH, LOW or OFF. The default settingis HIGH.OFF HIGHRINGERLOWOFF HIGHRINGERLOWOFF HIGHRINGERLOWOFF HIGHRINGERLOWOFF HIGHRINGERLOWOFF HIGHRINGERLOWOFF HIGHRINGERLOWOFF HIGHRINGERLOWOFF HIGHRINGERLOWOFF HIGHRINGERLOWUseful features duringa callHoldThis feature allows you to put an outsidecall on hold.1 Press MHOLD/MODEN during anoutside call.R If using the handset, you canplace it on the cradle.R Status indicator light will startflashing slowly.R During the hold, both party willhear music.2 To release hold, lift the handset ifthe handset is on the cradle.ORPress MHOLD/MODEN if the handsetis off the cradle.ORPress MSP-PHONEN if using thespeakerphone.Note:R If another phone is connected to thesame line, you can also take the callby lifting the handset.To turn the music on/off1 Lift the handset.2 MPROGRAMNR Status indicator light will startdouble flashing at an interval.3 MHOLD/MODEN ® M4N4 To select ON, press M1N.orTo select OFF, press M2N.5 MPROGRAMNR A long beep sounds.R Status indicator light will turn OFF.6 When finished, hang up.MuteWhile mute is turned on, you can hearthe other party, but the other partycannot hear you.1 During an outside call, pressMMUTEN.R Status indicator light will startflashing quickly.2 To return to the conversation, pressMMUTEN.R Status indicator light will stopflashing.FlashMFLASHN allows you to use the specialfeatures of your host PBX such asFor assistance, please visit http://www.panasonic.com/help 9Making/Answering Calls