Making calls1 Lift the handset and dial the phonenumber.2 When you finish talking, place thehandset on the cradle.Using the speakerphone1 MSP-PHONENR Status indicator light will turn ON.2 Dial a phone number.R Speak alternately with the otherparty.R If you have misdialed, pressMSP-PHONEN and start againfrom step 1.3 When you finish talking, pressMSP-PHONEN.R Status indicator light will turn OFF.Note:R For best performance, use thespeakerphone in a quiet environment.If necessary, adjust the speakervolume.R You can switch to the handset bylifting it up. To switch back to thespeakerphone, press MSP-PHONENand place the handset on the cradle.Adjusting the handset or the speakervolumePress VOL.MDN or VOL.MCN repeatedlywhile talking.R After hanging up, the volume level willbe saved.To redial the last number dialed (32digits max.)1 Lift the handset or pressMSP-PHONEN.R Status indicator light will turn ONafter pressing MSP-PHONEN.2 MREDIALNR Redial will dial the last numberyou dialed manually.3 When you finish talking, place thehandset on the cradle or pressMSP-PHONEN.R Status indicator light will turn OFFafter pressing MSP-PHONEN.Pause (for PBX/long distance serviceusers)A pause is sometimes required whenmaking calls using a PBX or longdistance service.Example: If you need to dial the lineaccess number 9 when making outsidecalls with a PBX:1 Lift the handset or pressMSP-PHONEN.R Status indicator light will turn ONafter pressing MSP-PHONEN.2 M9N ® MPAUSEN3 Dial the phone number.Note:R A 3.5 second pause is inserted eachtime MPAUSEN is pressed. Repeat asneeded to create longer pauses.Answering callsWhen a call is being received, the unitrings and the ringer indicator flashesquickly. You can answer the call bysimply lifting the handset.Using the speakerphone1 MSP-PHONENR Status indicator light will turn ON.2 When you finish talking, pressMSP-PHONEN.R Status indicator light will turn OFF.8 For assistance, please visit http://www.panasonic.com/helpMaking/Answering Calls