Panasonic KX-TEA308 Installation Manual

Also see for KX-TEA308NE: Service manual

Contents

Panasonic KX-TEA308 Installation Manual Manual pdf 60 page image

2.10 Starting the Advanced Hybrid System60 Installation Manual2.10 Starting the Advanced Hybrid System2.10.1 Starting the Advanced Hybrid SystemThis section explains the procedure for starting the PBX for the first time, with default values, or whenyou wish to re-initialise the PBX.1. Make sure that all outside (CO) lines you use are connected to the PBX.2. Set the Power Switch to the "OFF" position.3. Connect the AC cord to the PBX, then plug the AC cord into an AC outlet.4. Set the Power Switch to the "ON" position.NoteFor safety reasons, do not stretch, bend, or pinch the AC cord.5. Perform the following operation with a proprietary telephone (PT) connected to JACK 01.a. Press the PROGRAM button.b. Press #.c. Enter 1234.d. Enter 999.e. Press the NEXT (SP-PHONE) button.f. Press the SELECT (AUTO ANS/MUTE) button until "All Para" is displayed.g. Press the STORE (AUTO DIAL/STORE) button.h. Press the END (HOLD) button.i. Press the PROGRAM button.• The PBX will be initialised with the default values. The type of outside (CO) lines isautomatically detected.• If the PBX does not function properly, refer to "4.1.5 System Reset with System Data Clear".6. Programme the PBX using either one of the following methods:a. PC programming. Refer to "Section 3, Guide for KX-TE308 Maintenance Console".To AC OutletAC CordPower Switch