Panasonic KX-TDA5480 Programming Manual

Also see for KX-TDA5480: Installation manual Installation manual Installation manual Getting started Programming guide

Contents

Panasonic KX-TDA5480 Programming Manual Manual pdf 11 page image

2.2 ProgrammingProgramming Guide 11Parameter DescriptionsIP Address SettingsDHCP SettingsThe parameters indicated with "#" must be changed while the card is in the "STOP" status (see "2.3.1Status Control"). The changes must be followed by a reboot to become effective (see "2.5.1 Reboot").Parameter & Description Default Value Range# IP AddressSpecifies the IP address of the card.For more information, consult your networkadministrator.192.168.1.200 The following addressesare invalid:• Class D addresses• Class E addresses• Loopbackaddresses• Addresses withhost number all 0sor 1s# Subnet MaskSpecifies the subnet mask address of the card.For more information, consult your networkadministrator.255.255.255.0 Any address is valid.# Default GatewaySpecifies the default gateway IP address of the card.For more information, consult your networkadministrator.0.0.0.0 Same as the parameterIP Address, except thatthe address 0.0.0.0. isallowed.Parameter & Description Default Value Range# DHCP ServerSpecifies the use of a DHCP server.For details, refer to "Detailed Explanations".Don’t use Use,Don’t use# DHCP Server Port No.Specifies the port number for DHCP communicationsby the DHCP server.Generally, there is no need to change the default value.67 1 to 65535# DHCP Client Port No.Specifies the port number for DHCP communicationsby the card (the DHCP client).Generally, there is no need to change the default value.68 1 to 65535# DHCP Lease Time (min) 1-1440 minThis parameter is provided for engineer use only.1440 0 (disable),1 to 1440