Panasonic KX-TDA30 User Manual

Also see for HYBRID IP-PBX KX-TDA100: User guide User guide Technical information Technical information Features guide

Contents

Panasonic KX-TDA30 User Manual Manual pdf 194 page image

3.1.2 Settings on the Programming ModeYou can programme features using the programming mode.– Setting Features– Clearing Features• To exit at any time, lift the handset.• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.Setting FeaturesThe default settings are shown in bold letters. For later reference, place a check mark in the boxes below toindicate your customised setting.NoticeThe default value may vary depending on country/area.Followprogramminginput.To programme To exitTo enter the programming modeFollow Selection& Parameter.Press PROGRAMor PAUSE.Press PROGRAMor PAUSE.selection &parameterprogramminginputORPROGRAMPAUSEORPROGRAMPAUSEPress ENTERor STORE.ORAUTO DIALSTOREPress ENTERor STORE.ORAUTO DIALSTOREItem Programming In-put Selection & ParameterYour extension information00PT: The display shows the PBX or shelf number, slotnumber and port number.KX-TDA200>EXT1050:10308PBX no. Port no.Slot no.EXT2100:20101Shelf no.(1 – 4) Port no.Slot no.PS: The display shows the PS number.EXT3001:99001PS no.194 User Manual3.1.2 Settings on the Programming Mode