Panasonic KX-TDA30 User Manual

Also see for HYBRID IP-PBX KX-TDA100: User guide User guide Technical information Technical information Features guide

Contents

Panasonic KX-TDA30 User Manual Manual pdf 139 page image

1.8.13 Clearing Features Set at Your Extension (Extension FeatureClear)You can reset the settings of the following features on your extension to the default settings with oneoperation.This feature is also known as Station Programme Clear.Features Default SettingHot Line*1 OffMessage Waiting—(All the messages that have been left by other ex-tension users)OffCall Pickup Deny AllowCall Forwarding (FWD)*1 OffAbsent Message OffPaging Deny AllowTimed Reminder ClearedDo Not Disturb (DND)*1 OffCall Waiting for intercom calls*1Call Waiting for outside calls*1Disable (No call)Disable (No tone)Executive Busy Override Deny AllowBGM OffData Line Security OffParallelled Telephone The telephone in parallel rings.Log-in/Log-out Log-in*1 These features may not be reset depending on the system programming.Off-hook. On-hook.PT/SLT/PSEnter 790.9 07 C.Tone• For Users in Canada Only:After performing Extension Feature Clear, the setting of Call Waiting becomes "Enable(Tone)". In this case, dial tone 2 will be heard when you go off-hook.User Manual 1391.8.13 Clearing Features Set at Your Extension (Extension Feature Clear)