Panasonic KX-TDA0490 Programming Manual

Also see for KX-TDA0490: Getting started Getting started

Contents

Panasonic KX-TDA0490 Programming Manual Manual pdf 29 page image

2.2 ProgrammingProgramming Guide 293. Click ENTRY.A maximum of 16 hunt patterns can be created.4. Click OK.You will see a confirmation screen.NoteIf your entry contains an invalid value, you will be prompted to correct your input. Entercorrect values for the parameters shown in red and try again.5. Confirm your entry and click OK.To return to the previous screen, click CANCEL.Parameter DescriptionsThe parameters indicated with "*" must be changed while the VoIP Gateway Card is in the "STOP" status (see"2.3.1 Status Control"). The changes do not have to be followed by a reboot to become effective.Hunt GroupHunt Pattern EntryThe parameters below are used to create hunt patterns.For details, refer to "Detailed Explanations".Parameter & Description Default Value Range* Port1–8Assigns a hunt group to a VoIP gateway port.For details, refer to "Detailed Explanations".Hunt group 1 Hunt group 1 to 8Parameter & Description Default Value Range* Hunt Pattern No.Specifies the number for the hunt pattern to be created.When changing the current settings of an existing huntpattern, first delete the hunt pattern and then re-create withnew values.No default 1 to 16* Receive Leading NumberSpecifies the leading digits in received numbers by which todetermine the hunt group to direct incoming calls.For example, to direct incoming calls with numbers startingwith "9", specify the number "9" in this parameter. Likewise,to direct incoming calls with numbers starting with "1", specifythe number "1".However, if you want to direct incoming calls with numbersstarting with "950" and "951" to separate hunt groups, it isnecessary to make 2 hunt patterns with respective numbers,"950" and "951".No default Max. 30 digits