Panasonic KX-TDA0490 Getting Started

Also see for KX-TDA0490: Programming guide Getting started

Contents

Panasonic KX-TDA0490 Getting Started Manual pdf 25 page image

3.2 Programming the VoIP Gateway Card in the Los Angeles OfficeGetting Started 253.2 Programming the VoIP Gateway Card in theLos Angeles OfficeBased on the example network in "1.2 Network Devices and Numbering Plan", this sectiondemonstrates the procedure to program a VoIP Gateway Card for use in the Los Angeles office, asthe first step of setting up a VoIP network. VoIP communications between the 2 offices will be possiblewhen the cards, as well as the PBXs, in both offices are fully programmed.The procedure to program the card in the Chicago office is given in "3.3 Programming the VoIPGateway Card in the Chicago Office". In addition, the procedure to program the PBX in the LosAngeles office is given in "4.1 Programming the PBX in the Los Angeles Office".3.2.1 Starting the IP-GW16 Maintenance UtilityMake sure that a PC is connected directly to the VoIP Gateway Card with an Ethernet cross cable(see "2.2.2 Connection for Programming").The card should not be connected to the LAN at this point.1. Start Internet Explorer from the Start menu.2. a. In the Address box of Internet Explorer, typehttp://192.168.1.200 (default IP address of thecard).b. Press the ENTER key on the keyboard.Notes• If you cannot see the log-in screen, returnto "3.1.1 Preparing the PC" and confirmthat your PC has been configuredappropriately.• If you forget the IP address, you mustinitialize the card to the default setting (see"C1 Initializing the VoIP Gateway Card").3. a. In the Username box, type Administrator(default user name).b. In the Password box, type Administrator(default password).c. Click LOGIN.NoteIf you forget the user name or password, youmust initialize the card to the default setting(see "C1 Initializing the VoIP Gateway Card").