Panasonic KX-TD816CE Installation Manual

Also see for KX-TD1232CE: User manual addendum Installation manual Installation manual User manual addendum User manual

Contents

Panasonic KX-TD816CE Installation Manual Manual pdf 65 page image

4.6 CO Line ProgrammingISDN Line Number Assignment41865Description Assigns your ISDN network line telephone number. Yourtelephone number is sent to the called party with the CLIP (CallingLine Identification Presentation) feature and to the calling partywith the COLP (Connected Line Identification Presentation) featureoffered by the ISDN network service.Selection • CO line number: KX-TD816 – 01 through 08KX-TD1232 – 01 through 54• Telephone number: 16 digits (max.)Default All CO lines – Not storedProgramming 1. Enter 418.Display: ISDN CO NO.2. Press NEXT.Display: CO Line NO?→3. Enter a CO line number.To enter CO line number 01, you can also press NEXT.Display example: CO01:Not Stored4. Enter a telephone number.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new number.5. Press STORE.6. To program another CO line, press NEXT or PREV, orSELECT and the desired CO line number.7. Repeat steps 4 through 6.8. Press END.Conditions • Each number has a maximum of 16 digits, consisting of 0 through 9.• For the KX-TD1232, CO 01 through CO 12 are for the Master Systemand CO 13 through CO 24 are for the Slave, if available.• To display parts of the number which have scrolled off the display,press or .• CO 25 through CO 54 become available when the KX-TD290expansion unit is installed in the KX-TD1232.• Your telephone number will be informed to the called party if theoutgoing CLIR feature is disabled for the ISDN line in program [419]“ISDN Outgoing CLIR Service Assignment”.